- Category: Blueprints
- Update: 1.1 (19-05-2022)
- Unreal Engine: 4.26 - 5.0
- Platforms: PC, Console
The Fluid Flux is a powerful water system based on 2D shallow-water fluid simulations.
- Realtime shallow water simulation – fluid data modifiers, wave generator, and extendable interface
- Fluid surface rendering – caustics, wetness, underwater, waterline, advected foam, advected waves, blending with the ocean, dynamic audio detection
- Fluid Interaction – simple cheap ripple solver moving with character, optimized to an absolute minimum
- Ocean wave blending – rendering tillable ocean heightmap texture in a single pass
- Niagara environment interaction – High-quality effects, bouncy, plants, character swimming, boats,
- Clean, efficient, GPU-friendly implementation, interface designed with the KISS (Keep It Simple, Stupid) rule in mind
- Small, compact, and low memory footprint
- Tool for generating ultra-fast static meshes with flow maps baked into vertex color.
- Advanced fluid state management, loading state in gameplay.
- Niagara fluid async readback system for sampling height and flow of fluid in blueprints.
- Dynamic audio analyzer. The sound source is positioned based on fluid movement.
- Four example maps – beach, island, river, and baked static river
- Velocity-based fluid flow advection method for foam caustics and waves
With great power comes great responsibility. I’m trying to be a reliable marketplace creator so it is important for me to be clear about the limitations and disadvantages of using simulations. The Fluid Flux system is overhyped so please read the description below before you buy this product and make sure that everything meets your expectations and requirements:
- In general, I can’t solve every possible water problem in every possible type of project. The Fluid Flux is a huge step forward for the game industry but also makes everything harder. Simulations can be hard to control and tweak, sometimes a single parameter can change the flow of fluid on an entire map.
- The Fluid Flux simulation is based on the Shallow Water Equations (SWE) solver, the algorithm was published by Matthias Müller in “Real-time Simulation of Large Bodies of Water with Small Scale Details”. Simulation is calculated on heightfield mesh which means all obstacles are rendered to heightmap with top-down projection. Fluid can’t be simulated in caves and multilayered.
- Scalability is a real problem. The simulation requires allocating floating-point render targets so the maximum recommended resolution of texture is 1024×1024. That means if 1 pixel represents 100 cm in real-world (very low quality) then your simulation area can cover approximately 1km x 1km square with low detailed water. It’s not that much but still useful. The simulation frame can be baked to static mesh and used as mesh placed on the level.
- Multiplayer is not supported for dynamic simulation because synchronization of render targets is limited. However, the system can be used in a multiplayer game as long as your gameplay is not dependent on fluid simulation results.
- The geometry of fluid is rendered using a static mesh plane displaced by fluid height. The system uses a huge plane (1024×1024) for rendering the water surface without any dynamic tesselation. This method has a lot of quality flaws.
- Statically generated LOD mesh can be inconsistent with waterline post-process this issue will be addressed in the future.
- Water Plugin is not supported in the current version. It is possible to use my water material with the water plugin mesh but it is not officially supported.
- Niagara fluid readback system returns results with one frame delay. It’s good enough for most features like swimming water detection etc.
- My support time is very limited. It’s an early version of this product, be aware that there will be multiple updates that will improve the quality and efficiency. The project is enormously big and complicated, simulations can be unpredictable – sorry for all the problems and bugs. I’m ready to help in case of problems contact me on Discord or by e-mail.
- The documentation is incomplete in some areas yet. I was pushed to release as soon as possible and could not have enough time to build simple examples. The Fluid Flux system is clean and elegant but blueprint reading skill, and example code analysis is required to use.
- The axis-aligned rectangular volume of the simulation is only supported which means it can’t be rotated.
- The simulation area can’t be moved in runtime. Movable volume is one of the most important features for future updates.
- Trace hits with dynamic fluids are not supported now.
- The system also does not support the wave break effect because this approximation of fluid does not contain the needed data to render it.
- Underwater glass, holes, and the submarine view are not supported.
Good and bad practices
- Try to avoid using huge simulation resolution because you will run out of memory very fast, 1024×1024 seems like a good compromise for now.
- Don’t make your gameplay rely on fluid simulation in multiplayer because it will not be synchronized.
- Avoid using Fluid Flux on flat surfaces, subtle slopes are always better.
- Avoid hard-edged geometry (boxes) it can be approximated wrongly in height map and sometimes look terrible
- Don’t overestimate possibilities if I was not prepared ocean with ships and a huge island covered by rivers and simulated lakes then there is probably some reason for that.
- Try to not update the simulation ground in every frame it can cost you a lot of performance.
Questions & Answers
- Unreal Engine 5 support?
The Fluid Flux was created and tested on Unreal Engine 4. The Unreal Engine 5 is in an early stage of development, and unstable, the pack can be used with this version of the engine but I can’t support engine-related bugs and all differences between UE4 and UE5. Please read the “Known issues” chapter to make sure that you are aware of the most common issues that you may encounter.
- Why is the price so high? Could you do some promotion?
- Creating a Fluid Flux pack took me over 16+ months of work during nights, I was doing it after a regular job. Normally this kind of work would cost the company at least $150 000 so it is a huge shortcut for everyone.
- The subscription for all future updates and support is included in the price. This kind of system requires a lot of support. The engine updates make it even harder. It is not the only product on my marketplace profile so my time is very limited right now. I quit my job to support this product and I will probably have to hire someone for help.
- The product is a combination of multiple big features that are designed to work together and thanks to that your life can be easier. You don’t have to buy multiple products and work on merging ripple simulation, fluid simulation, water surface, ocean waves, buoyancy, waterline, post-process, and swimming. I did it for you.
- Take a look at my marketplace profile and make sure that I am a trustworthy creator with hundreds of positive reviews. The price is always calculated on the real work and time that I need to put into my products. Someday you will understand that time is a real currency that is worth something in this world.
- I will start doing some promotional sales when everything will get stable and I will find myself ready to support new customers. If you are not in rush then just add my product to the wishlist and be patient. If you want to be notified a few days earlier about a planned promotional sale then join my Discord server 🙂
- I’m not forcing anyone to buy my product. There are free alternatives like Niagara Fluids, and Water Plugin you can try them and compare results with my demo, maybe you don’t need the Fluid Flux.
- Can it be used in my open-world game?
The open-world setup was not tested yet. The demo examples are showing how the system can be used. I can’t promise anything more at this point of development. Just assume that you get what you see in my videos no more no less.
- Does it support multiplayer/replication?
Unfortunately, fluid simulation is not replicated. A huge render target is generated in every frame and cant be synchronized so if there would be some differences between clients there is no way to correct them. The package can be used in multiplayer games for visual addition.
- External packs integrations ALS/UDS/Fluid Ninja
I am planning to work on some integrations in the future. If you have some specific pack in mind let me know.
- Can I use it with Voxel Plugin?
Yes, you can use Fluid Flux with Voxel Plugin but it is also limited to heightfield projection so caves and planets are not supported.
Use Simulation.RuntimeCaptureDelay = 1.0 to force simulation to wait for the voxel plugin map to generate mesh before rendering it to the height map.
The heightmap in this presentation is updated every frame using CaptureGroundHeightmap. It is not very efficient and should be probably optimized to only update the area around the brush when something changes on the map. The UpdateGroundMap(Position, Size) function would be a better choice in this case.
- What about VR and mobile?
The VR devices and mobile are currently not supported by me.
Dynamic fluid simulations with high precision can’t be calculated on mobile so only baked meshes/states can be used on this platform. I am planning to add VR and mobile support in future updates. The pack will receive a cheap surface material mode similar to the solution presented in Aquatic Surface. One user notified me that my demo maps are working without issues on Oculus Quest 2 but I did not test it yet so I can’t confirm it.
- How to add swimming to ALS? Can you show me?
This task is on your side. The Fluid Flux BP_FluxDataComponent) can give you all data that you need to implement swimming. I’ve also prepared an example swimming implementation (BP_FluxSwimmingComponent) for testing.
- Should I change to Fluid Flux? Is it better than WaterPlugin/Oceanology or Aquatic Surface?
It depends on what requirements you have. The Fluid Flux is good at creating a dynamic river simulation on heightfields, and interactive scenes but does not scale very well so if you need just a background ocean then you should not bother using simulations. Play the demo of the Fluid Flux and decide if this is what you want.
- Why blueprints? It is slow because of that?
This system is fully implemented in blueprints but relays mainly on GPU (shaders/render targets). The cost of c++ implementation would be similar in typical conditions. The cost of blueprints will be reduced by Niagara implementations in the future so it will work even better. The user interface and lack of tessellated fluid surface is a bigger problem with blueprints but I will also work on solving that.
- Is fluid flux calculated deterministically?
If you run a simulation on the same machine it is deterministic (constant delta time is used) but there are probably differences between floating-point operations on different GPUs so it can’t be fully deterministic. In multiplayer the biggest problem is the synchronization of state when someone joins the game and when the player loses some frames because of spikes and the simulation can’t work it off – I’ve decided to limit the number of accumulated iterations per frame in this case.
- Do I need this pack? Other water systems like your Aquatic Surface can do the same.
Well, if you can’t see the difference then probably you don’t need the Fluid Flux. I’ve prepared a simple comparison of Fluid Flux and Aquatic Surface that visualizes the difference:
That does not mean Aquatic Surface is bad. It’s a great product with a completely different feature list. You have to choose a product that fits your requirements.
- What about the future of this project?
I’m planning a lot of updates, more optimizations, and moving implementation to Niagara.
The code that doesn’t exist is the code you don’t need to debug. I am trying to do my best and solve all possible bugs or find good workarounds but there is always something that can be broken it’s like a typical lifetime of applications nowadays.
Simulations can be unpredictable some edge cases are probably still not handled. In case of finding some specific bug, you can rep[ort it to me and I will take a look at it in a few days. Before sending the report:
- make sure that you use the newest version of my pack.
- prepare a detailed explanation of the repro steps needed to recreate your bug, and make sure that the explanation is as clear as possible.
- information about the engine version you use, and your development platform.
- create a minimal example project that can show me the bug (it will increase the chance of fixing it)
- prepare a video or screenshots presenting the problem and reproduction steps.
Now you can report this bug by sending an e-mail at firstname.lastname@example.org.
- Meshes with dithering enabled can not be cached by ground capture. There is a workaround for this problem presented in the M_Photoscan_Master material.
- Currently, known issues that exist only on UE5+:
- In some configurations of UE5 reflections can flicker on rivers. It’s somehow related to the reflection capture actor but I was not able to find the reason why. Removing box capture helped once but some users still experience this bug. If you will find the answer then please let me know.
- The audio parameters are not working on UE5 (will be fixed in 5.0.2) so Fluid Flux uses a workaround that is switching between under-fluid and over-water fluid waves instead of soft blending.
- It seems like construction scripts are working differently when the level is loading during the editor start in UE5.1.Render targets are not initializing properly because of that. If you will see that something is not loaded then just reopen the map/restart the simulation and everything will work fine again – sorry for that.
- Plants will not load properly on the map if you are not in “Real-Time” render mode in the editor. Its limitation of blueprints I don’t have any event that could execute afterload and adjust Niagara effects.
- “Real-Time” render mode is also required to simulate in the editor. Otherwise, the view will not refresh after each frame.
The current status of improvements can be followed on Trello.
- Surface mesh – better water surface. Currently, it uses dense planar mesh but in the final stage, the mesh will be dynamically tessellated.
- Scalability – Large-scale simulations locally updated with the moving areas are in my plans.
- Niagara fluids – the system will be rewritten to Niagara fluids when it will be stable and ready for this.
- Audio detection – the current system uses an ambient audio source and a simple dynamic source I am planning to improve to three dynamic sources of audio that works at different distance.
- Simulation volume – movable simulation area and working with multiple simulations a the same time.
- Alternative material modes – path tracing and stylized water
This section covers the fundamentals of Fluid Flux and its tools. If you are new to Unreal Engine, you should become familiar with the Unreal Editor interface, Blueprint visual scripting, and the types of content. Working according to the documentation can provide the best possible experience with this product.
The Fluid Flux pack requires enabling a few basic plugins and TPP input config for testing the character. The package is an asset pack so it can be downloaded directly to the project. The package can be added to any project using Epic Launcher but users also can use an empty project compatible with UE4.26 configurated by me that can be downloaded from the link: FluidFlux_Template.
A list of plugins that needs to be enabled can be found below:
- Editor Scripting Utilities
- Procedural mesh Component
- Asset Tags (optional)
The first place to visit in the demo folder is Demo/Maps. This folder contains all example maps that are working perfectly with the TPP example character (BP_DemoCharacter). If the project uses another character template then probably input should be changed to make it work. Input config can be downloaded from this link: DefaultInput
Make sure that DBuffer is enabled in your project settings because it’s required for proper decal (wetness and caustics) rendering. If you don’t want to use those effects then you can disable decal material in the surface actor.
The Fluid Flux project is organized in a certain way, this short description will bring you closer to what kind of content can be found in each folder.
- Demo – The demo is the most important folder for new users. The demo examples present how to use this pack, how effects can be achieved, and how to integrate systems with characters. Everything that can’t be found in this documentation probably will be presented in a very clean way in the demo folder.
- Editor – editor-related tools, icons, utilities, procedural mesh generator
- Simulation – Shallow water simulation actor and tools for controlling fluids and generating state.
- Interaction – Simple system of interactions that adds detailed lightweight ripple fluid simulations.
- Surface – Presenting the simulated fluid renders surface, underwater volume, post-process, caustics, and audio and combines everything together.
- Environment – Niagara particle systems that allow readback pieces of information from simulation implementing swimming, buoyancy, and drive particles using fluid state.
- Waves – a system designed for generating ocean waves that can be used in the background and mixed with fluid simulation. Before starting work with the pack it’s worth being familiar with the structure of the pack and the systems that it provides.
The current newest version is described on the marketplace page and on top of the documentation. Frequent updates of Fluid Flux are planned so always make sure that the Fluid Flux package version is up to date but be aware of potential problems when updating.
Changes that can be made during updates:
- fixing bugs
- adding features and examples
- removing/renaming files
- improving quality and exposing parameters
I am always trying to minimalize the damage after the update however it is not an easy task when an update system on the marketplace supports only adding or replacing files. There are a few basic rules worth noticing before updating:
- It’s better to have some backup. Copy your version of the pack before doing the update,
- Remove the pack from the project before updating it. This way you will get a clean, and fresh version of the pack without any ghost files.
- Do not modify the pack on your own. If you need modifications then you can inherit classes/materials and override functions. Store child classes and custom material instances outside the Fluid Flux folder.
- If you need some small trivial modification that could improve usability then you can let me know we will figure out some solution maybe put it into the next update.
The BP_FluxSimulation blueprint is the heart of the Fluid Flux system. Basically, this blueprint handles important tasks like:
- Rendering of the ground heightmap to texture.
- Updating simulation of shallow water fluid, foam, and wetness.
- Baking and exporting simulation state.
- Sending data to the fluid surface renderer.
The Shallow Water simulation is based on the idea of assuming linear vertical pressure profiles so it is simulated in two dimensions. In general, the algorithm can be described in a few steps:
- Simulation data is stored on 2D render targets.
Ground map – information about landscape and obstacles
Velocity (RG) Depth(B) Foam(A) map – stores information about fluid
Height(R) Wetness(G) map – stores surface height and wetness of the surface
- The slope of the ground heightfield and the slope of fluid is combined and used for calculating the pressure and velocity.
- Simulation is an interactive process of updating fluid height and velocity.
- The result of integration is used for foam and velocity advection.
- Fluid modifiers can be used as input for simulation to change the current state.
- The simulation frame is used for accumulating fluid wetness and generating the fluid surface mesh displacement.
The BP_FluxSimulation actor placed on the map is doing nothing because it’s empty and needs to be filled with fluid. It is the simplest way to fill containers with fluid is by adding a Modifier source actor.
If the “Pixel Depth Offset” feature is used in the material then it may be not rendered to a ground map and cause some simulation problems. In this case, the best option is to use MF_FluxPixelDepthOffset material node that will automatically disable “PixelDepthOffset” during the process of caching the ground map. The M_Photoscan_Master material is an example of a workaround for this problem with the use of the MF_FluxPixelDepthOffset node.
Before starting to simulate the fluid on your level make sure that Real-time rendering is active in your viewport options.
The modifier component affects the simulation state and changes the current simulation state. It’s the simplest way to control simulation. Modifiers can be used for:
- Adding fluid to the simulation container.
- Removing fluid simulation container.
- The changing velocity of the fluid in some areas.
- Simulating interaction with fluid
- Generating waves
- Control fluid flow and volume
The Fluid Flux contains predefined modifiers:
- BP_FluxModifierComponent – Base parent class for all fluid modifiers.
- BP_FluxModifierSourceComponent – Simple modifier that allows adding/removing fluid and changing velocity in a specific area.
- BP_FluxModifierGerstnerComponent – Generates Gerstner waves.
- BP_FluxModifierInteractionComponent – Generates interaction with the fluid. Can be added to the character.
Every modifier component extends the basic BP_FluxModifierComponent and implements specific behavior. Users can create new modifier classes with specific behaviors like whirpools/waves. The BP_FluxModifierSourceComponent component is a good simple example of a modifier that can be used as a starting point for learning the system.
The modifier container is a special type of actor that can store multiple modifiers and send them to the simulation. If the actor implements the BPI_FluxModifierContainer interface then it’s considered a modifier container
BPI_FluxModifierContainer interface can be implemented by any actor. A good example is BP_DemoCharacter that uses BP_FluxModifierInteractionComponent to interact with a fluid. AddModiffiers function only needs to be implemented to make it work.
BP_FluxModifierContainerActor is a basic container that can combine multiple modifier components in a single actor that works simultaneously.
BP_FluxModifierSourceActor is a specific type of Container actor that simplifies the process of adding simple source modifiers to the scene.
Every modifier is rendered in an additional render target pass, so it’s not cheap. It’s good practice to minimalize the number of fluid modifiers inside the simulation for achieving the best possible performance.
Sometimes simulation can behave unexpectedly because of stability loss on high slopes. It’s a well-known issue, it can be fixed by adjusting a few parameters and making the simulation more reliable.
- Slope Scale (Increase)
Increasing this parameter will scale down the height of the scene on Z-axis and make your fluid move slower on slopes. (This parameter will be probably redesigned in the future version for better consistency with the world scale measurements).
- Simulation Delta Time (Decrease)
Fluid flux is updating with constant delay time. That means the time that elapsed between two frames of the game is divided by delta time and the result is the number of iterations. In general, more iterations mean less performance. By default, the Simulation Delta Time attribute is set to 0.2, it is not safe in terms of accuracy but can work with the highest performance.
- Debug Preview / Debug Hidden In-Game (Debug)
Pay attention to the ground debug preview. If you will spot some red spikes in places where the simulation does not work properly then probably the problem of your ground texture and geometry should be adjusted.
- Try to tweak other variables like Slope Clamp, Velocity Clamp, Friction, Damping, Gravity, and even World Pixel Scale can make difference.
I am still experimenting different solutions for this spikes problem and trying to figure out some method to force stability even in bad conditions. You can expect multiple improvements in the future updates.
The simulation actor needs to capture the ground to recognize the environment and find slopes for fluid movement calculation. The simulation actor contains settings that allow configuring which objects should be rendered to the ground heightfield.
The Debug preview option is the most important feature here, it is showing a height map that will be used for simulating water on the scene.
It’s noticeable that not every detail will be captured in-ground map probably and the accuracy depends on the simulation resolution scale. The shader used for rendering this preview is coloring lines based on slope and exposes the discontinuity of the ground.
- Green lines – easy to simulate very stable fluid
- Blue lines – Good slope for moving fluid in some direction
- Red lines – can cause some instability if fluid flows on it but good for walls
- White lines – there may be some cave that can expose holes in the fluid mesh.
- Fully red polygons are representing holes and discontinuity in the mesh. It should be eliminated if fluid can flow into this area.
If you will notice that some objects should not be rendered to heightmap you can exclude them and if something is not rendering you can start investigating what is going on without simulating the fluid.
Meshes with enabled dithering can’t be rendered during ground capturing process. There is a workaround for this problem presented in the M_Photoscan_Master material. MF_FluxPixelDepthOffset node is used for disabling dithering on objects that are rendered in top-down flat projection.
Sometimes picking “Hidden Actors” one by one to exclude them from heightfield can be a waste of time. There is an additional tag called “FluxHide” that can be used by actors to hide them automatically.
The Fluid Flux uses a static ground map for simulating fluids on it but updating is also allowed from time to time. It’s not a very cheap operation so it should not be done every frame.
The BP_BreakableDam presented in the video can be destroyed when the player hits the trigger. It is a good example of updating the ground after the dynamic object. Take a look at the Break function which is the heart of the dam system.
It evaluates UpdatGroundMap on a simulation actor, which takes the position and the size of the object that will disappear to recreate the ground in this area. You can do the same operation when adding something on your level.
The ground scene capture component renders the current scene to heightmap texture. Sometimes we need to exclude some actors that should not be fluid blockers. In the Simulation:Ground: Scene tab you can find multiple options that may be helpful to determine meshes should that be visible in the heightmap:
- Use hidden actors for excluding by mesh
- Use hidden class for excluding by actor class
- Use the “FluxHide” tag in actors that should not be rendered.
- Use M_PhantomMesh material to render mesh ONLY during processing ground (invisible in the world) good for imitating soft slopes of waterfalls or just creating an alternative version of ground when the environment is more complicated (like indoor meshes).
The BP_FluxSimulation blueprint comes with a simple editor that allows simulating the state of the fluid on the map in the editor mode. Simulation can be prepared in the editor baked to state or dynamically updated by the simulation blueprint.
The PDA_FluxSimulationState is a special data asset created especially for storing the current frame of the simulation. The simulation state is the most important structure in the system because:
- It’s dynamically updated by the simulation actor
- Can be saved to a data asset file
- Can be loaded in runtime
- Can be used as a starting point for the simulation
- It delivers data that can be rendered by the surface actor
Pay attention to simulation resolution! The “Power of Two” rule is a fundamental necessity due to the way game engines work. You will not be able to export simulation state if it is size is not power of two (128/256/512/1024 etc.)
A short tutorial about generating the fluid states:
The state use case is described below:
A dynamic simulation state is automatically created in BP_FluxSimulation.CurrentState actor constructor script. Data stored in it can be easily previewed.
If BP_FluxSimulation.SurfaceActorReference is set then actors are communicating together and the state is automatically passed to BP_FluxSurface.SimulationState
BP_FluxSimulation.CurrentState can be baked to an asset by clicking the right button on BP_FluxSimulation and choosing Scripted Actions -> Flux Export Simulation.
The Baked state can be used as BP_FluxSimulation.InitialState in simulation actor
Baked state can be also used BP_FluxSurface.SimulationState after removing/disconnecting the Simulation actor.
The BP_FluxSurface is responsible for an audiovisual representation of the simulation state data.
The surface actor implements a list of advanced subsystems:
|Volume Absorption, Volume Scattering||
Configuring all those subsystems may take a lot of time, especially hard for new users which is why the package contains predefined surface templates.
The BP_FluxSurface is an abstract base parent class which means it can’t be placed on a level and each template is a child and can be dropped directly on a map.
There are a few basic templates:
- BP_FluxSurface_Water – default water surface, spawned dynamically when the simulation target surface is not specified.
- BP_FluxSurface_River – simple river material and basic underwater post-process, reiver audio
- BP_FluxSurface_Ocean – advanced ocean materials, ocean audio, materials blended with wave actor, underwater mesh, underwater scattering, and absorption volume
In the tutorial below, we will go through a useful workflow for generating static meshes based on a baked state of the simulation. With this method you can achieve the highest performance, unfortunately, the waterline effect will not correlate very well with static mesh geometry.
- Setting up LOD and padding
- Converting a generated mesh to a static mesh asset
- Preparing material for static meshes
- Using static mesh in Surface actor
Mesh generation tools can be found in the BP_FluxSurface – Procedural Mesh tab.
Switch GenerateProceduralMeshView = true to see a preview of the generated mesh. After choosing this option surface automatically generates static mesh based on the Procedural Mesh tab configuration.
The last step is selecting SurfaceProceduralMesh Component and clicking “Create StaticMesh” which will export the mesh to the static mesh asset.
If SurfaceProceduralMesh is not visible on the list of BP_FluidSurface components then you have to deselect the surface and select it again. It’s working like that because the engine does not refresh the list of components after switching on/off generation mode.
Now you can find your static mesh in the content browser and preview it.
The river is simulated on the map and then converted to static mesh. The velocity flow map still works, mesh can be directly used by the surface actor.
Saving static mesh assets with dynamic material is impossible that is why you will have to clean the material slot in the newly created mesh before saving it. You can also set “static” type of material (MI_River_SurfaceOverStatic .UseFluxState = false) that will allow to preview mesh in editor.
Fluid data like foam and velocity are encoded in vertex color which is why they can use simplified material that does need to sample render targets. MI_River_SurfaceOverStatic is an example configuration of material prepared for static meshes. MI_River_SurfaceOverStatic .UseFluxState = false forces the system to read data from vertex color.
BP_FluxSurface can render static meshes using SurfaceMeshMode=StaticMesh which means the mesh will not be transformed by simulation state scale and geometry will be taken from SurfaceOverMesh component configuration.
The Fluid Fluix is using Niagara asynchronous readback events to read data from fluid render targets and pass them to blueprints. The BP_FluxDataComponent is a listener that can receive, update and store fluid data at a certain location.
The Fluid Flux uses this feature in multiple situations:
- buoyancy and floating objects
- automatic dam breaking
- interaction detection
- swimming system
- fluid sound source analyzer
- underwater camera detection
Add BP_FluxDataComponent to your actor and it will automatically detect the fluid surface under the actor. BP_FluxRotatorActor is a good simple example of an actor that can react to fluid.
The BP_FluxInteractionCapture is a system designed for adding detailed ripple simulations on the fluid surfaces as a result of the interaction.
- It’s a perfect addition that can improve the quality of baked simulation almost for free.
- It is currently supporting the simplest fast ripple solver
An example of the interaction system configuration is presented in the BP_DemoCharacter. A detailed description of the implementation can be found below:
- BP_FluxDataComponent – This component is reading the fluid data like height and velocity that can are needed during further calculations of interaction. You can find more info about this component and configuration in the section Async readback.
- BP_FluxInteractionComponent – This component is storing a list of interaction sources. The interaction source is a sphere attached to a component (or skeletal mesh bone) that will generate waves after interacting with fluid.
- Interaction sources are attached to skeletal mesh with the tag specified in OwnerComponentTag attribute so it’s important to add this tag (FluxInteractionOwner) to skeletal mesh that will move the interaction sources.
- The BPI_FluxInteraction is the interface that takes care of communication between the actor and the interaction capture system. It should be added in the Class Settings of the actor that will interact.
- Implementat the GetInteractions in BPI_FluxInteraction. When BP_FluxInteractionCapture is an overlapping interactive actor then it’s calling this GetInteractions function to find pieces of information about interactions that occurred.
There are many steps to do before interaction start working but no worries you can debug and make sure that every part of your implementation works correctly:
1. Test it on demo maps at first
2. Enable DrawDebug in BP_FluxInteractionCapture
3. Enable DebugDraw in BP_FluxDataComponent
4. Enable DebugDraw in BP_FluxInteractionComponent
5. Make sure that “GetInteractions” is evaluated. Put a breakpoint in this function to check.
The Niagara integration is based on three elements:
- BP_FluxNiagaraActor communicates with the simulation and data to the Niagara system.
- NE_FluxData emitter should be inherited by the Niagara system to read the data.
- NMS_FluxData special module that extracts simulation data to Stage Transients variables that can be used to drive the particles.
All particle systems (trash, plants, splashes) in the pack are constructed the same way, fill free to check the examples and modify them.
The BP_FluxOceanWave is a dedicated actor for simulating ocean waves. Implementation is much simpler than the classical analytical approaches like Gertner or FFT. The system uses multiple tillable textures and combines them into a height map that can be used in the post-process/surface/Niagara system to represent wave displacement.
The fluid surface uses data from BP_FluxOceanWave placed on the map pinned to the BP_FluxSurfaceActor variable. The blending between simulations of ocean waves can be configured in special cases like on the beach map.
The beach example contains ocean waves blended with fluid simulation. All materials configurated for use with oceans are declared in the Surface/Templates/Ocean/ folder. Surface material uses the UseFluxOcean=true flag to activate ocean wave blending.
Ocean waves in the simulation are generated using the modifier BP_FluxModifierWaveActor that is adding fluid and velocity at the borders of the simulation area.
Additional waves in the background with simplified material (SurfaceDistantMaterial) are attached to the surface in the “DistantMeshes“.
Ocean scene setup
Preparing an ocean scene is an advanced topic because it requires multiple actors working together at the same time. It’s good to try all other tutorials before starting to work on recreating the ocean scene.
There is no video tutorial for ocean waves yet because I am planning a lot of improvements on this topic (infinity ocean surface already implemented) that will be published soon in version 1.2 of Fluid Flux. I have decided to make a tutoprial after the release.
Examples of setup are presented in the demo maps FluxIslandMap and FluxBeachMap you can copy this setup (Surface, Simulation, WaveTexture, WaveModifier) or create it from scratch on your map. Recreating the ocean scene and detailed waves setup is described below:
- Add wave actor BP_FluxOceanWave. Set the height of the ocean surface, and borders.
You can use RenderDebugPreview to see the analytical waves preview. This actor will not be visible it’s only there for generating the texture of ocean waves that the surface will use.
- Add ocean BP_FluxSurface_Ocean and combine it with simulation the same way as presented in tutorials. Set surface parameters:
– borders that will be blended with wave texture
– the hardness of blending,
– texture actor added in the previous step.
– Change SurfaceMeshTransform.Scale parameter to (2.0, 2.0, 1.0) to see ocean waves around the simulation.
- Add simulation area and set reference actor to use the ocean surface, the same way as in the surface tutorial).
- Add BP_FluxModifierWaveActor modifier. Change modifier component settings:
– Scale of modifier component to cover the simulation area
– SurfaceHeight to generate water at a certain height
– StateAreaBorders to select which borders should generate water
- Add distant meshes that will use lightweight material for rendering the far-distance ocean
– add plane meshes SM_FluxPlane256x256, scale it to 1000×1000 units.
– add meshes to list DistantMeshes in BP_FluxSurfaceOcean